Sharp AR-C330 Key operators, Operation Manual

Page: 177 / 186

8-31
CHAPTER
8
KEY OPERATOR PROGRAMS
KEY OPERATOR
’S GUIDE
Key operator programs
To change an account number
1. Press the “CHANGE” key.
2. Enter the account number to be changed using the
10-key pad.
3. Enter a new account number.
4. Press the “ENTER” key.
●
If a number that is already registered is entered, the message
“
THIS NUMBER IS ALREADY USED.
” will appear. Press the
“OK” key and enter another number.
5. To change other account numbers, repeat steps 2 to 4.
Press the “OK” key twice to exit the program.
To print all registered account numbers
1. Press the “PRINT” key.
●
The copier will start printing. To stop printing after starting,
press the “CANCEL” key.
2. Press the “OK” key to exit the program.
Price Setting
This program is used to set the price per sheet of copying, printing or
scanning for individual account numbers or all accounts. Four price per
sheet values (#1, #2, #3, and #4) can be set. Use this program to set
these price per sheet values and to assign the price codes to individual
accounts or all accounts. Based on this setting with the count data, the
billing data of the copier, printer, and scanner functions can be
calculated for individual accounts. The calculated data can be displayed
with program “Billing by Account.”
When the “PRICE SETTING” key is pressed, a screen for selecting
“COPIER,” “PRINTER” or “SCANNER” will appear. Press the key of
the desired mode.
This section shows the procedure used after the "COPIER" key is
pressed. You can follow the procedure similarly after pressing the
"PRINTER" key or the "SCANNER" key.
KEY OPERATOR PROGRAMS
PRICE SETTING
(COPIER)
PRICE CODE
# 1 80
# 2 60
# 3 180
# 4 90
PRESENT PRICE NEW PRICE
INPUT NEW UNIT PRICE AND PRESS [ENTER].
USE INTERRUPT KEY FOR DECIMAL POINT.
1/2
OK
ENTER