Sharp AR-C330 Key operators, Operation Manual

Page: 151 / 186

8-5
CHAPTER
8
KEY OPERATOR PROGRAMS
Category Program Name Function Page No.
Preheat Mode Sets the time that elapses before the copier enters 8-17
Setting the preheat mode after copying is completed.
Message Time Sets the length of time that messages are displayed. 8-17
Setting
Enable/Disable Disabling of Beep Enables or disables sounding of beep when keys 8-18
Settings When Keys Touched are touched.
Disabling of Auto Prevents automatic paper selection. 8-18
Paper Selection
Disabling of Auto Prevents automatic switching between the paper 8-18
Tray Switching trays.
Disabling of Prohibits the use of the bypass tray during 8-19
Bypass-Tray duplex copying.
in Duplex Copy
Disabling Prevents stored programs from being replaced or 8-19
Deletion of Job deleted.
Programs
Disabling of Prevents the use of the optional document feeder 8-19
Document Feeder when it malfunctions.
Disabling of Duplex Temporarily prevents the duplex system from 8-19
Copying operating when it malfunctions. Allows the use of the
copier but not the duplex system.
Disabling of Prevents damage to the stapler while awaiting 8-20
Stapler repair service.
(The stapler is included in the optional staple sorter
(AR-SS2).)
Disabling of Prevents the selection of COVERS mode. 8-20
Covers Mode (The COVERS mode can be used when an optional
document feeder is installed.)
Disabling of Provides or prevents access to key operator programs 8-20
PC/Modem Access through a PC/modem without key operator code entry.
Disabling of Sleep Disables the sleep mode. 8-21
Mode
Disabling of Disables pre-scan in black/white copying. 8-21
Pre-scan in B/W
Copy
Registration Registration Adjusts registration in colour copying or printing. 8-22
Adjustment Adjustment
Auto Colour Auto Colour Enables automatic colour gradation correction when it 8-23
Calibration Calibration becomes misadjusted.
KEY OPERATOR
’S GUIDE
Key operator programs