Sharp AR-C330 Key operators, Operation Manual

Page: 168 / 186

8-22
CHAPTER
8
Registration Adjustment
This program is used to adjust registration if deviation of registration of
characters or lines occurs in colour copying or printing.
NOTE:
This program can be selected by pressing the “REGISTRATION
ADJUSTMENT” key on the category menu screen.
KEY OPERATOR PROGRAMS
COPIER MODE
AUTO COLOUR CALIBRATION
OTHER FUNCTION
SETTINGS
TIMER SETTING
REGISTRATION
ADJUSTMENT
ENABLE/DISABLE
SETTINGS
OK
1. Select the “REGISTRATION ADJUSTMENT” key on the
category menu screen.
● The following display will appear.
KEY OPERATOR PROGRAMS
REGISTRATION ADJUSTMENT
EXECUTE
USE A4 OR 8 11 PAPER FOR THIS ADJUSTMENT.
PRESS [EXECUTE] TO PRINT THE TEST PATCH.
OK
1
2
/
2. Press the “EXECUTE” key.
●
The copier will print the test patch.
3. After the test patch is printed, place it on the document
glass of the copier with 10 white sheets of the same size
on top of it and press the “EXECUTE” key again.
● Place the test patch on the document glass as shown in the
illustration.
● The copier will start scanning the test patch on the document
glass and the adjustment will automatically be made.
●
Place the test patch so that the mark on the test patch is
positioned to the mark on the document glass that indicates
the centre reference point.
●
If a scanning error occurs frequently, the test patch may be
smudged. Press the “OK” key to return to step 1 and print a new
test patch. Then, repeat this step.
4. Press the “OK” key to exit the program.
●
To re-execute the registration adjustment, repeat all the steps.
KEY OPERATOR PROGRAMS
KEY OPERATOR
’S GUIDE
Key operator programs