Sharp AR-C260 Operation Manual Download Page 39

Page: 39 / 140

2-17

STORAGE OF SUPPLIES

Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges
for the finisher.

■

Proper storage

1. Store the supplies in a location that is:

●

clean and dry,

●

at a stable temperature,

●

not exposed to direct sunlight.

2. Store paper in the wrapper and lying flat.

●

Paper stored in packages standing up or out of
the wrapper may curl or become damp, resulting
in paper misfeeds.

For best copying results, be sure to use only Sharp Genuine Supplies which are designed,
engineered, and tested to maximize the life and performance of Sharp products. Look for
the Genuine Supplies label on the toner package.

GENUINE SUPPLIES

00-08.book 17

ページ

２００２年１１月８日　金曜日　午前９時３９分

Summary of Contents for AR-C260













































































































































Search results

Summary of Contents for AR-C260

Reviews:

Related manuals for AR-C260

Brands by name

Popular brands

Sharp AR-C260, Operation Manual

Search results

Summary of Contents for AR-C260

Reviews:

Related manuals for AR-C260

Brands by name

Popular brands