Sharp AR-C260 Operation Manual Download Page 70

Page: 70 / 140

4-2

PART NAMES AND FUNCTIONS
(The Reversing Automatic Document Feeder)

Exterior

[

]Original reminder (page 4-6)

Indicates an original is still on the document glass.

Document feeding area cover (page 7-2)

Open to remove misfed originals in this area.

Original guides (page 4-6)

Adjust to the size of the originals.

Document feeder tray (page 4-6)

Set the originals here for automatic feeding.

*RADF exit area cover (page 7-2)

Open to remove misfed originals.

*RADF exit area

Finished originals are output here.

Document cover

Document glass

All originals which cannot be copied from the
document feeder tray must be copied here.

* RADF (Reversing Automatic Document Feeder) is optional.

00-08.book 2

ページ

２００２年１１月８日　金曜日　午前９時３９分

Summary of Contents for AR-C260













































































































































Search results

Summary of Contents for AR-C260

Reviews:

Related manuals for AR-C260

Brands by name

Popular brands

Sharp AR-C260, Operation Manual

Search results

Summary of Contents for AR-C260

Reviews:

Related manuals for AR-C260

Brands by name

Popular brands