Sharp AR-C260 Operation Manual Download Page 65

Page: 65 / 140

LARGE CAPACITY TRAY

3-17

Misfeed removal

When a misfeed occurs in the large capacity tray, remove the misfed paper, following the procedure below.

While holding the tray release lever,
carefully slide the large capacity tray away
from the main unit until it stops.

Remove any misfed paper from the main
unit and the large capacity tray.

●

Be sure not to tear the
misfed paper during
removal.

●

Open and close the
upper right side cover
of the copier after
removing the misfed
paper from the copier.

If the misfed paper
cannot be removed
easily, open the upper
right side cover to
remove the paper.

Push the large capacity tray toward the
main unit and latch it into place.

If misfed paper is not found in step 2, pull
the tray out.

When pulling the large
capacity tray out, be
sure to pull it out after
the paper tray control
button lamp goes out.

Remove the misfed paper.

Gently push the tray back into place.

Confirm that the misfeed
display is cleared.

Release lever

Upper right
side cover

00-08.book 17

ページ

２００２年１１月８日　金曜日　午前９時３９分

Summary of Contents for AR-C260













































































































































Search results

Summary of Contents for AR-C260

Reviews:

Related manuals for AR-C260

Brands by name

Popular brands

Sharp AR-C260, Operation Manual

Search results

Summary of Contents for AR-C260

Reviews:

Related manuals for AR-C260

Brands by name

Popular brands