Sharp AR-C260, Operation Manual

Page: 27 / 140

LOADING PAPER
2-5
2
NOTES
●
Be sure to load 5-1/2" x 8-1/2" paper, A5 paper,
and postcards as shown in the diagram below.
Post cards.
5-1/2" x 8-1/2" paper, A5 paper.
●
When loading plain paper other than paper
recommended for color, SHARP standard paper,
special media other than postcards, SHARP-
recommended transparency film, or paper to be
printed on the back, the paper must be loaded one
sheet at a time. Loading more than one sheet at a
time will cause misfeeds.
●
Before loading heavy paper, straighten any curling
in the paper.
●
When adding paper, remove any paper remaining
in the tray, combine it with the paper to be added,
and reload as a single stack.
●
Do not use paper that has already been printed on
by a plain paper fax machine or a laser printer.
This may cause printed images to become dirty.
●
When printing on transparency film, be sure to
remove each sheet as it exits the machine.
Allowing sheets to stack in the output tray may
cause curling.
●
Use only SHARP-recommended transparency
film. Insert the film so that the rounded corner is on
the left for horizontal loading, or on the right for
vertical loading.
●
When loading multiple sheets of transparency film
in the bypass tray, fan the sheets several times
before loading.
Horizontal
loading Vertical
loading
00-08.book 5 ページ ２００２年１１月８日 金曜日 午前９時３９分