20
Product Version 1.0 | Revision A | Released 2022-4-21
Attach and align the bracket to a surface. The shorter side of
the bracket is the side that attaches to a wall surface. There are
two slots provided to align the bracket. Using appropriate fas
-
teners, align and level the bracket. Then tighten to the surface.
Using the holes shown, use appropriately rated fasteners for
both location and surface material and construction. Fasten
-
ers should be no larger than M6.
Use the supplied countersunk M10 bolts to secure the fixture
to the bracket. Ensure cabling is not pinched or trapped when
mounting fixture.
PLEASE NOTE! REMOVE RUBBER FEET FROM FIXTURE IF SO
EQUIPPED PRIOR TO MOUNTING.
Medium 6/8 Series
Alignment Slots
Wall Attachment Slots
FIxture Attachment Slots
WALL BRACKET ATTACHMENT
