23
Product Version 1.0 | Revision A | Released 2022-4-21
WIRELESS
In POI versions with wireless, it is necessary to pair the fixture with a new transmitter (by default, the fixture is linked
to the SGM factory transmitter during the testing and QA process).
In order to do so, make sure the fixture is powered on before taking the following steps:
•
STEP 1: Using a SGM magnetic spanner tool, place the magnet close to the LED indicator, and wait for 3 sec
-
onds. The LED indicator will blink orange for 1-2 seconds, before switching to static green again. The fixture can
now be paired to a new transmitter.
•
STEP 2: Select “connect” or “link” on a wireless DMX transmitter. The transmitter and the internal SGM receiver
should now be linked together.
Repeat the process to link the fixture to another transmitter.
To disconnect the fixture from the currently paired wireless transmitter, hold the magnet for 3 seconds over the LED
indicator. The LED indicator will blink orange for 1-2 seconds, switching later to green again. The fixture is now logged
off.
