SGM i-6, User Manual

Page: 32 / 40

32
Product Version 1.0 | Revision A | Released 2022-4-21
NAME SENSOR TYPE
Mainboard Temperature
LED Left Temperature
LED Center Temperature
LED Right Temperature
Humidity Other
LED on Time Hours Red 1 Time
LED on Time Hours Green 1 Time
LED on Time Hours Blue 1 Time
LED on Time Hours White 1 Time
NAME SENSOR TYPE
LED on Time Hours Red 2 Time
LED on Time Hours Green 2 Time
LED on Time Hours Blue 2 Time
LED on Time Hours White 2 Time
LED on Time Hours Red 3 Time
LED on Time Hours Green 3 Time
LED on Time Hours Blue 3 Time
LED on Time Hours White 3 Time
SUPPORTED RDM FUNCTIONS
The i-6 Series features support for various RDM functions.
RDM (Remote Device Management) is a protocol enhancement to USITT DMX512 that allows bi-directional commu
-
nication between the fixtures and the controller over a standard DMX line. This protocol will allow configuration, sta -
tus monitoring, and management.
A RDM controller is needed to get control over the supported parameters. See the tables below for supported RDM
functions.
PLEASE NOTE! THE RDM CONTROLLER COMMUNICATES WITH THE FIXTURES TO SHOW ONLY THE AVAILABLE
OPTIONS FOR EACH RDM FUNCTION. TABLES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
SENSORS
RDM enables various sensor readouts for remote device monitoring. See the table below for sensors and sensor types.
PLEASE NOTE! THE RDM CONTROLLER COMMUNICATES WITH THE FIXTURES TO SHOW ONLY THE AVAILABLE
SENSORS FOR THIS FIXTURE. THE TABLE IS SUBJECT TO CHANGE WITHOUT NOTICE.
PID ACTIONS
ALLOWED
NAME
0x0082 Device label
0x0081 Manufacturer Label
0x00E0 DMX Personality
0x00E1 DMX Personality Description
0x0200 Sensor Definition
0x0201 Sensor Value
0x0080 GET Device Model Description
0x0400 GET / SET Device Hours
0x0051 GET Parameter Description
0x0500 / 501 Display Invert / Level (POI
n.a.)
PID ACTIONS
ALLOWED
NAME
0x0090 Factory Defaults
0x1001 Reset Device
0x0120 Slot Info
0x0121 Slot Description
0x0122 Default Slot Value
0x8626 SET CRMX Log Off
0x8060 GET Serial number
0x8625 GET / SET FAN 0=AUTO 1=LOW
2=HIGH 3=FULL
0x8620 GET / SET Led freq (197647Hz) / value
RDM