SEW movigear sni-b, Operating Instructions Manual

Page: 21 / 268

Operating Instructions – MOVIGEAR® SNI-B
21
3
Example nameplate and type designation of electronics
Unit structure
3.8 Example nameplate and type designation of electronics
3.8.1 Nameplate
The following figure gives an example of a MOVIGEAR
®
nameplate. For the structure
of the type designation, refer to chapter "Type designation".
3.8.2 Type designation of electronic cover
The following table shows the type designation of the electronics cover:
9007201839835019
[1] Nameplate of connection unit
[2] Nameplate of application option
[3] Electronics cover nameplate
[1]
[3]
[2]
M G x 4 – 5 0 3 – SNI – B – 10 – A / XT
Electronics cover option
XT = Increased torque
Electronics cover variant
A = With application slot
0 = Without application
Design
10
11 =
= Die-cast design (standard)
Die-cast design (wet areas)
MOVIGEAR
®
version
MOVIGEAR
®
installation technology
SNI = Single Line Network Installation
Connection type
3 = 3-phase
Connection voltage
1)
50 = AC 380 – 500 V
Size
2
4 =
= Torque class 200 Nm
Torque class 400 Nm
Product line
MG = MOVIGEAR
®
1)
MGF..4/XT has a different connection voltage range, see chapter "Technical data"