25
SESAMO
PROSWING
INTER LOCK WIRING AND USE
Proswing control board can work in inter lock with another Proswing board. Inter lock means
that it is possible to open/close only one door at a time. To connect two boards proceed as
follow (Fig. 35):
• connect “board with priority” AUX IN 1 to “board without priority” AUX OUT 1
-A
• connect “board with priority” COM to “board without priority” AUX OUT 1
-B
• connect “board with priority” AUX OUT 1
-
A to “board without priority” AUX IN 1
• connect “board with priority” AUX OUT 1
-
B to “board without priority” COM.
Use 4x0,22 shielded cable, do not connect shield.
Set priority for opening in case of simultaneous command through parameters 15 and 17:
• set parameter 15 =2 on “board with priority”;
• set parameter 17 =1on “board with priority”;
• set parameter 15 =3 on “board without priority”;
• set parameter 17 =1 on “board without priority”.
In this way in case of simultaneous command will open Master as a first door.
ATTENTION: In case of inter lock wiring between two double Proswing the wiring has to
be made between the two master boards, whereas one of the two will be considered with
priority and the other without priority to the interlock functioning..
ATTENTION: Disconnect jumper near AUX OUT-1 both on board with priority and board
without priority (Fig.29).
one
LOGIC SWITCH
In addition to base or advanced selectors there is a switch selector.
This switch selector is directly wired to control board and allows three logics:
I
Manual (Proswing S) or Stop Closed (Proswing M)
0
Automatic (Two Radars)
II
Stop Open
If Base or Advanced selector is connected, switch selector is excluded.
CONNECTOR FOR PC
–
UNIT CONNECTIONS
For PC connection board (optional) is required to connect the PROSWING unit to a Personal
Computer. The following is possible with MILLENNIUM WARE software:
•
Advanced adjustments of some operating parameters
•
Diagnostic and advanced information on status
•
Microprocessor programming
DELIVERY MODALITY
Close the automatism cover and tight screws.
Hand the guarantee and test certificate over filled according to the instructions shown in the
certificate. The certificates must be sent to SESAMO in 8 days from the positive test date.
Hand the technical documentations over to the client .
Summary of Contents for PROSWING R
