![Sesamo PROSWING R Manual Instructions Download Page 22](http://html1.mh-extra.com/html/sesamo/proswing-r/proswing-r_manual-instructions_1247165022.webp)
22
SESAMO
PROSWING
11
RANGE: 0÷9
[t=200÷2000 ms]
push back hit. It is powered again when door is
near to fully closed position
6-
ELETTROMAGNETE
(
MAGLOCK
)
WITH
DELAY
10
6
See Fig.27 - Magnet, keep door closed , if
released, the door is free. It does not require a
push back hit.. The magne twill work only the
complete closing of the door.
11
RANGE: 0÷9
[t=200÷2000 ms]
(
3
) For some types of electric lock it is possible to modify the duration of the impulse for
activation, or the delay of the opening from the command to unlock. The parameter has
different meaning and adjustment range settings according the model of electric lock set using
parameter 10.
(
4
) To ensure the closing of the electric lock is possible to adjust the closing force.
(
5
) When locks are not installed motor keeps door closed.
(
6
) It is possible to manage a feedback signal of the lock, so that it indicates the unlocking
status: after giving the command to unlock, the control board waits for confirmation before
starting opening cycle. If this sign does not reach the control board in a maximum determined
time, automatism opens the door anyway.
(
7
) It is possible to use one of the aux input as command for manual unlocking of the lock that
works in parallel to the automatic unlocking command, it can be used to open the door in
manual opening.
SELECTORS TERMINAL BOARD
Connect logic selector (Fig.28 F) using shielded cable 4 wires 0,22mm min, without connecting
shield. For wiring refers to Fig.28.
For further information on multi-logic selector use, see the instructions for use
.
EXTERNAL PERIPHERAL POWER CONNECTOR
(15
VDC
)
Power value range is 15 Vdc ± 5 %, depending on the resistive load situations connected to
these terminals.
Terminal OUT / 15 VDC :
POSITIVE ( + )
Terminal COM :
NEGATIVE ( - )
Do not invert power polarity. When the green led is on it indicates normal voltage
presence 15V. If off check mains voltage
WIRING AND USE FOR DOUBLE PROSWING
Double Proswing is an automatism for double door.
It is possible to realize a double door in two ways:
1
with two Proswing installed on each door and then connected together ;
Summary of Contents for PROSWING R
