CDHD
Introduction
User Manual
1
1
Introduction
1.1
Documentation
1.1.1
About This Manual
This manual describes the Servotronix CDHD Servo Drive. It provides the
information required for installation, configuration and basic operation of the
CDHD unit.
This document is intended for persons who are qualified to transport, assemble,
commission, and maintain the equipment described herein.
1.1.2
Documentation Set for CDHD
This manual is part of a documentation set. The entire set consists of the
following:
CDHD Quick Start Guide. Basic setup and operation of the drive.
CDHD User Manual. Hardware installation, configuration and operation.
CDHD VarCom Reference Manual. Parameters and commands used to
program the CDHD.
1.2
Safety
Only qualified persons may perform the installation procedures. You do not need
to be an expert in motion control to install and operate the drive system.
However, you must have a basic understanding of electronics, computers,
mechanics, and safety practices.
The CDHD utilizes hazardous voltages.
Be sure the drive is properly grounded.
Before you install the CDHD, review the safety instructions in this manual.
Failure to follow the safety instructions may result in personal injury or
equipment damage.
1.2.1
Safety Symbols
Safety symbols indicate a potential for personal injury or equipment damage if
the recommended precautions and safe operating practices are not followed.
The following safety-alert symbols are used on the drive and in the
documentation:
Caution
ISO 7000-0434 (2004-01)
