Chapter E - Aynchronous motor
Rev. A 10-99
DigiDrive Manual Series 2000 / 4000
C
HAPTER
E
A
SYNCHRONOUS MOTOR
Drive series 2000 and 4000 are able to control asynchronous motors. To perform this, a few
conditions are required :
Firmware version must include regulation for asynchronous motor (test version :
2601).
Compatible Windows user (Version 1.20 or higher) for parameters settings.
Asynchronous motor must have a resolver or an encoder feedback.
This chapter describes only special parameters suitable to asynchronous motor. Other
parameters have the same functions defined previously in this manual.
Important :
The change of motor and feedback type is possible only with Windows user
version 1.20 or higher.
A double click in the motor/feedback box included in the toolbar of the Windows user enable a
Window for the selection of motor and feedback type. This Window can be also called by the
« Motor type » item of the « Configuration » menu .
If the firmware version does not include the possibility to change motor or feedback type, the
selection are automatically disabled.
When the motor or the feedback type is changed, the parameter list is also updated in
accordance with selected motor and feedback .
Servo Dynamics Corp. 21541-D Nordhoff St. Chatsworth, CA 91311 www.servodynamics.com
Pg 73
2. Special parameters for asynchronous motors
Double click here
1. Change of motor and feedback type
Summary of Contents for DigiDrive 2000 Series
Page 2: ...www servodynamics com...
