Chapter E - Aynchronous motor
Rev. A 10-99
DigiDrive Manual Series 2000 / 4000
2.3
Feedback type
Two feedback types can be used with asynchronous motor :
Resolver
Encoder
With a resolver feedback, the settings are identical as describe for brushless motors. The
Resolver shift angle is ignored.
The encoder must be
external powered
.
The motor encoder must be wired to the encoder inputs of the XENCODER connector (see
section 0 of chapter D, 1.3.3
XENCODER
wiring).
With encoder feedback, the encoder simulation is disabled, the input is directly wired on encoder
output. All parameters for the configuration of encoder simulation are not used.
E
NCODER INPUT RESOLUTION
, A
DDRESS
54.
The encoder resolution (number of pulse for one revolution) must be set in this parameter.
Servo Dynamics Corp. 21541-D Nordhoff St. Chatsworth, CA 91311 www.servodynamics.com
Pg 75
2.3.2
Encoder feedback
2.3.1
Resolver feedback
Summary of Contents for DigiDrive 2000 Series
Page 2: ...www servodynamics com...
