Maintenance
Section 4
4-12
Part Number 020003999 6/14
MDH Series Graphic Medallion Removal & Installation
The graphic medallions on the MDH Series Ice/Beverage Dispensers are made out of a flexible duratran that can be
removed/replaced from the front of the unit without the use of tools (back-lit merchandiser light box does not need to
be removed from the unit).
MEDALLION REMOVAL
1. Loosen and remove the 2 knurled screws from
either the right or left side of the merchandiser frame
starting with the bottom one first. Left side removal
illustrated below. Note: A Phillips head screw driver
may be used if the screws are too tight.
2. Remove the end portion of the frame that holds the
medallion in the merchandiser.
3. With the end portion removed, pull the 2 clear plastic
sheets apart inside the merchandiser to expose the
medallion that is sandwiched in between.
4. Pull out only the medallion, leaving the 2 clear
plastic sheets still inside the merchandiser.
5. To install/replace the medallion, slide the medallion
back in between the 2 clear plastic sheets, replace
the end portion of the frame and hand tighten the
knurled screws.
4
4
3
3
2
2
1
1
Summary of Contents for MDH-302 Series
Page 6: ...Table of Contents continued 4 Part Number 020003999 6 14...
Page 51: ......
