SEPTENTRIO PolaRx5TR, Reference Manual

Page: 474 / 512

4 SBF Reference
4.2.16 Miscellaneous Blocks
ReceiverSetup
Number: 5902
"OnChange"
interval: Block generated each time a user-command
is entered to change one or more val-
ues in the block (e.g. when entering the
setMarkerParameters
command)
The
ReceiverSetup
block contains parameters related to the receiver and its installation.
When generating RINEX files, this block defines the RINEX file name and the contents of the
header.
For all fields containing a string, if the length of the string is lower than the size of the
corresponding field, the unused bytes are set to zero.
Parameter Type Units Do-Not-Use Description
Sync1
c1
Block Header, see 4.1.1
Sync2
c1
CRC
u2
ID
u2
Length
u2
1
byte
TOW
u4
0.001
s
4294967295
Receiver time stamp, see 4.1.3
WNc
u2
1
week
65535
Reserved
u1[2] 2 bytes reserved for future use, to be ignored by decoding software
MarkerName
c1[60] Marker name (set with
setMarkerParameters
).
MarkerNumber
c1[20] Marker number (set with
setMarkerParameters
).
Observer
c1[20] Observer name (set with
setObserverParameters
).
Agency
c1[40] Observer agency (set with
setObserverParameters
).
RxSerialNumber
c1[20] Receiver serial number.
RxName
c1[20] Receiver GNSS engine name.
RxVersion
c1[20] Receiver firmware version.
AntSerialNbr
c1[20] Serial number of the main antenna (set with
setAntennaOffset
).
AntType
c1[20] Type of the main antenna (set with
setAntennaOffset
).
deltaH
f4
1
m
δ
H offset of the main antenna (set with
setAntennaOffset
).
deltaE
f4
1
m
δ
E offset of the main antenna (set with
setAntennaOffset
).
deltaN
f4
1
m
δ
N offset of the main antenna (set with
setAntennaOffset
).
MarkerType
c1[20] Marker type (set with the
setMarkerParameters
command).
Rev 1
GNSSFWVersion
c1[40] Version the firmware installed on the receiver.
Rev 2
ProductName
c1[40] Product name.
Rev 3
Rev 4
Latitude
f8
1
rad
− 2
·
10
10 Latitude of the reference position, from
− π/ 2
to
+ π/ 2
, positive North of
Equator. Use the
setPVTMode
command to set the reference position.
Longitude
f8
1
rad
−
2
·
10
10
Longitude of the reference position, from
−
π
to
+ π
, positive East of
Greenwich. Use the
setPVTMode
command to set the reference po-
sition.
Height
f4
1
m
− 2
·
10
10 Ellipsoidal height of the reference position (with respect to WGS84 el-
lipsoid). Use the
setPVTMode
command to set the reference position.
StationCode
c1[10] Station code (set with
setMarkerParameters
). This field can for ex-
ample contains the four-letter IGS station code assigned to the receiver.
MonumentIdx
u1 Monument index (set with
setMarkerParameters
). This index is used
to identify the monument when there are multiple monuments at the
same station.
474