SEPTENTRIO PolaRx5TR Reference Manual Download Page 469

Page: 469 / 512

4 SBF Reference

FileUploadStatus

sub-block deﬁnition:

Parameter

Type Units

Description

Type

File upload type:

This sub-block contains information on SBF FTP push

This sub-block contains information on RINEX FTP push

This sub-block contains information on BINEX FTP push

This sub-block contains information on NMEA FTP push

This sub-block contains information on RTCMv3 FTP push

This sub-block contains information on CGGTTS FTP push

10:

This sub-block contains information on SBF CloudIt

11:

This sub-block contains information on RINEX CloudIt

12:

This sub-block contains information on BINEX CloudIt

13:

This sub-block contains information on NMEA CloudIt

14:

This sub-block contains information on RTCMv3 CloudIt

ErrorCode

Latest error code reported by FTP push or CloudIt:

No error

FTP: Connection to FTP server failed

FTP: Wrong credentials

FTP: Only part of the ﬁle could be transferred

FTP: The local ﬁle is not available (e.g. it has been deleted by the user before

being FTP pushed).

FTP: Server permissions prohibit ﬁle creation

FTP: Server permissions prohibit folder creation

FTP: The disk is not accessible. This can for example happen when a past FTP

transfer did not succeed and the receiver tries it again but the disk has been

unmounted in the meantime.

Unexpected error

11:

CloudIt: Not authorized to upload ﬁles to CloudIt server

12:

CloudIt: Timeout while trying to reach server

13:

CloudIt: The redirect_uri does not match the one registered in the authentica-

tion server

14:

CloudIt: Client error server response, see RxMessages for more information

15:

CloudIt: Server unreachable or bad response

20:

CloudIt: An internal incorrect conﬁguration of CloudIt

21:

CloudIt: One or more parameters are invalid

22:

CloudIt: One or more parameters are missing

40:

CloudIt: The local ﬁle is not available (e.g. it has been deleted by the user before

being uploaded).

41:

CloudIt: Failed to upload ﬁle to server

RetryQueueSize

Number of ﬁles of the type identiﬁed in the

Type

ﬁeld that could not be uploaded but

that will be retried by the receiver at a later time.

NrFailedTransfers

Number of ﬁles of the type identiﬁed in the

Type

ﬁeld that could not be uploaded and

for which the receiver will not retry anymore. This number is clipped to 254 if larger

than 254.

Padding

u1[..]

Padding bytes, see 4.1.5

469

Summary of Contents for PolaRx5TR

































































































































































































































































































































































































































































































































Search results

Summary of Contents for PolaRx5TR

Reviews:

Related manuals for PolaRx5TR

Brands by name

Popular brands

SEPTENTRIO PolaRx5TR, Reference Manual

Search results

Summary of Contents for PolaRx5TR

Reviews:

Related manuals for PolaRx5TR

Brands by name

Popular brands