SEPTENTRIO PolaRx5TR, Reference Manual

Page: 434 / 512

4 SBF Reference
ExtEventVectorInfoGeod
sub-block definition:
Parameter Type Units Do-Not-Use Description
NrSV
u1 Number of satellites for which corrections are available from the
base station identified by the
ReferenceID
field.
Error
u1 PVT error code. The following values are defined:
0: No Error
1: Not enough measurements
2: Not enough ephemerides available
3: DOP too large (larger than 15)
4: Sum of squared residuals too large
5: No convergence
6: Not enough measurements after outlier rejection
7: Position output prohibited due to export laws
8: Not enough differential corrections available
9: Base station coordinates unavailable
10: Ambiguities not fixed and user requested to only output
RTK-fixed positions
Mode
u1 Bit field indicating the GNSS PVT mode, as follows:
Bits 0-3: type of PVT solution:
0: No GNSS PVT available (the
Error
field indicates
the cause of the absence of the PVT solution)
1: Stand-Alone PVT
2: Differential PVT
3: Fixed location
4: RTK with fixed ambiguities
5: RTK with float ambiguities
6: SBAS aided PVT
7: moving-base RTK with fixed ambiguities
8: moving-base RTK with float ambiguities
10: Precise Point Positioning (PPP)
12: Reserved
Bits 4-5: Reserved
Bit 6:
Set if the user has entered the command
setPVTMode,
Static, , auto
and the receiver is still in the process
of determining its fixed position.
Bit 7: 2D/3D flag: set in 2D mode (height assumed constant and
not computed).
Misc
u1 Bit field containing miscellaneous flags:
Bit 0:
Set if the baseline points to the base station ARP. Unset if
it points to the antenna phase center, or if unknown.
Bit 1: Set if the phase center offset is compensated for at the
rover (i.e. the baseline starts from the antenna ARP), unset
if not or unknown.
Bit 2: Proprietary.
Bit 3: Proprietary.
Bits 4-5: Proprietary.
Bits 6-7: Reserved
DeltaEast
f8
1
m
− 2
·
10
10 East baseline component (from rover to base)
DeltaNorth
f8
1
m
−
2
·
10
10
North baseline component (from rover to base)
DeltaUp
f8
1
m
−
2
·
10
10 Up baseline component (from rover to base)
DeltaVe
f4
1
m / s
− 2
·
10
10 East velocity of base with respect to rover
DeltaVn
f4
1
m / s
− 2
·
10
10 North velocity of base with respect to rover
DeltaVu
f4
1
m / s
−
2
·
10
10 Up velocity of base with respect to rover
Azimuth
u2
0.01
degrees
65535
Azimuth of the base station (from 0 to 360 ◦ , increasing towards
east)
Elevation
i2
0.01
degrees
−
32768
Elevation of the base station (from -90 ◦ to 90 ◦ )
ReferenceID
u2 Base station ID
CorrAge
u2
0.01
s
65535
Age of the oldest differential correction used for this baseline com-
putation.
434