Senquip ORB-X1-G, User Manual

Page: 81 / 136

Hysteresis decimal
The amount by which the measured
value has to drop below the threshold
to re-enable the event.
-1000 to
1000
°C tc1.hysteresis
Type text
Determines the type of thermocouple
connected. Valid values are: K, J, T, N, S,
E, B and R
1 chars tc1.type
Warning text
Warning thresholds. Refer to user
guide. -1000 to
1000
°C tc1.warning
Alarm text Alarm thresholds. Refer to user guide.
-1000 to
1000
°C tc1.alarm
CAN 1
Name
text A name that is meaningful to the user. 25 chars can1.name
Interval integer
The number of base intervals after
which the CAN module is turned on.
Set to 0 to disable.
0 to
10000
can1.interval
Nominal
Baud Rate
integer
Baud rate for CAN communication.
Supported values are: 125, 250, 500,
1000
kbit/s can1.nominal_baud
Capture
Time
integer
The device will capture matching
messages for this length of time.
Seconds can1.capture_time
TX Enable boolean
Allows the device to transmit and
acknowledge messages on the CAN
bus.
can1.tx_enable
ID Capture
List
text
List of IDs to be captured in HEX
format, separated by a comma eg:
18FEE60A. Leave blank to capture all.
200
chars
can1.id_list
CAN 2
Name
text A name that is meaningful to the user. 25 chars can2.name
Interval integer
The number of base intervals after
which the CAN module is turned on.
Set to 0 to disable.
0 to
10000
can2.interval
Nominal
Baud Rate
integer
Baud rate for CAN communication.
Supported values are: 125, 250, 500,
1000
kbit/s can2.nominal_baud
Capture
Time
integer
The device will capture matching
messages for this length of time.
Seconds can2.capture_time
TX Enable boolean
Allows the device to transmit and
acknowledge messages on the CAN
bus.
can2.tx_enable
ID Capture
List
text
List of IDs to be captured in HEX
format, separated by a comma eg:
18FEE60A. Leave blank to capture all.
200
chars
can2.id_list
Current
Loop 1
Name text
A name for the input that is meaningful
to the user.
25 chars current1.name
Interval integer
The number of base intervals after
which the input is sampled. A value of
1 means that the input is collected every
base interval. Set to 0 to disable.
0 to
10000
current1.interval
ORB User Guide, Release 1.1
6.7. External Sensor Settings 75