Senquip ORB-X1-G, User Manual

Page: 34 / 136

Figure 2.17. Label with general information and passwords
Take note of the Wi-Fi and setup passwords as you will need them to continue with the setup. In the
example above, the ORB identifier is DE9032030, the Wi-Fi password is hjg3iplg and the setup password is
QvjSF3jk.
Setup Mode Setup Mode allows initial customer configuration via the integrated web-server. This mode
is enabled when the Setup button is pressed for more than 2 seconds.
In setup mode, an integrated Wi-Fi Access Point (AP) is enabled through which the installer can access
the ORB’s built in web-server. The web-server allows for initial setup using a web based interface, similar
to setting up a home router. In this mode, a user can connect to the ORB using any computer, tablet or
mobile phone that has Wi-Fi and is loaded with a browser. After the ORB is connected to a network,
changes can be made remotely using the Senquip Portal.
If connected to external power, the ORB will remain in setup mode as long as the lid is open. If no
external power is available, the ORB will enter sleep mode after 10 minutes of no activity. To re-enable
setup mode, press the Setup button again for 2 seconds. Setup mode will be exited once the lid has been
closed for more than 10 seconds.
ORB User Guide, Release 1.1
28 Chapter 2. Getting Started