Senquip ORB-X1-G, User Manual

Page: 29 / 136

9 Input 2 IN2 Analog or digital input
10 Output OUT1 Open collector output
ORB-X1
11
Thermocouple TC- Thermocouple negative pin
12 Thermocouple TC+ Thermocouple positive pin
ORB-C1
11
CAN High CAN H CAN bus CAN high input
12 CAN Low CAN L CAN bus CAN low input
The terminal block allows for push-in connection, meaning that no tools are required. A defined contact
force ensures that the contact remains stable over the long term and is high vibration environments. A
finger operated release button for each terminal allows for convenient, tool-free operation.
Wire Specification:
Wire stripping length 8 mm
Conductor cross section solid min. 0.2 mm
Conductor cross section solid max. 1.5 mm
Conductor cross section flexible min. 0.2 mm
Conductor cross section flexible max. 1.5 mm
Conductor cross section AWG min. 24
Conductor cross section AWG max. 16
Please ensure that all external power is removed from the ORB before wiring fitment begins.
Power and ground wires must be rated to at least 1A and should have a voltage rating suitable for the
application. A 1A fuse in-line with the power connection is recommended. Signal wires should be
chosen based on the application and may require specific features such as individual shielding, twisted
pairs or impedance matching. In extremely noisy electrical environments, it is recommended that a
shielded cable be used and that the shield only be connected to ground on the power supply end. Do not
ground the shield on both ends.
The material from which the chosen cable is manufactured should be suitable for the environment in
which it is used. Be sure to check chemical resistance, UV stability and flex durability of the cable being
used.
ORB User Guide, Release 1.1
2.6. Wiring guide 23