Senquip ORB-X1-G, User Manual

Page: 59 / 136

Motion Wake
Threshold
decimal
The motion
threshold above
which the device
will wake from
hibernation.
1 to
2000
milli-g accel.motion.wake_threshold
Count Motion
Hours
boolean
Counts the number
of hours the device
exceeds the Motion
Wake
Threshold.
Typically used as
an machinery work
vs idle hour meter.
accel.motion.count_hours
GPS
Name text
A name for the
GPS signal that is
meaningful to the
user.
25
chars
gps.name
Interval integer
The number of
base intervals after
which the gps is
sampled. A value
of 1 means that the
input is collected
every base interval.
Set to 0 to disable.
0 to
10000
gps.interval
Max Time integer
Maximum time the
device will wait for
a valid GPS fix.
0 to
3600
Seconds gps.maxtime
Position
Position Alert boolean
Sets whether a
change in position
generates an alert. gps.position.alert.enable
Radius integer
An alert will be
raised if the device
moves further than
this value from the
expected position.
1 to
10000
Meters gps.position.alert.radius
Hysteresis integer
Once the alert is
active or inactive,
the radius must
change
by this
value to change the
alert state.
1 to
10000
Meters gps.position.alert.hysteresis
Expected Lati-
tude
decimal
Latitude at which
the
device is
expected to be.
-90 to
90
Degrees gps.position.alert.lat
Expected
Longitude
decimal
Longitude at
which the device is
expected to be.
-180 to
180
Degrees gps.position.alert.lon
Speed
ORB User Guide, Release 1.1
5.5. Internal Sensor Settings 53