Senquip ORB-X1-G, User Manual

Page: 30 / 136

Figure 2.14. Wiring example with a sheathed cable
To ensure IP rating is retained, a sheathed cable with diameter suitable for use with the cable gland insert
should be used. Three cable gland seals are supplied as specified in the table below. The gland with the
single hole should be used when a single cable is required; the gland with two holes should be used
where two cables are required etc. Cable seals are manufactured using NBR (Nitrile Butadiene Rubber)
and are resistant to oils and biological oils, solvents and most industrial chemicals. Always check the suit-
ability of the cable gland insert with all chemicals found in the operating environment.
Part No No. holes Hole diameter Cable
A 1 11mm 6-11mm
B 2 5mm 3-5mm
C 3 4mm 2-4mm
2.7 Initial setup
Initial setup can be performed using the ORB’s integrated web-server using any Wi-Fi enabled phone,
tablet or computer. Once the ORB is connected to a network, configuration can be performed remotely
ORB User Guide, Release 1.1
24 Chapter 2. Getting Started