Digital 9000
| 39
Preparing the Digital 9000 system for use
To
attach
the accupack/battery pack:
왘
Slide the accupack/battery pack onto the guide rails of the bodypack
transmitter until it locks into place with an audible click.
The bodypack transmitter is then ready for operation.
Connecting microphones and audio sources
The audio input is designed for the connection of both pre-polarized con-
denser microphones and other audio sources. DC powering of the con-
denser microphones is via the 3-pin special audio socket
.
왘
Use one of the recommended Sennheiser microphones or the
Sennheiser CI 1-4 line/instrument cable.
왘
Connect the 3-pin special audio connector of the Sennheiser microphone
or the Sennheiser CI 1-4 line/instrument cable to the 3-pin special audio
socket
왘
Lock the connector by screwing down the coupling ring.
For an overview of suitable microphones, refer to the product over-
view on page 22.
2
1
1
1
2