![background image](http://html.mh-extra.com/html/sennheiser/skm-9000/skm-9000_instruction-manual_1242287057.webp)
Using the EM 9046
56 |
Digital 9000
“Load config” – Loading a configuration
The “
load config
” menu item allows you to load up to 10 saved settings of
your system configuration (see also the “
save config
” menu item).
In addition, you can ...
• load the last configuration saved (“
last
”).
• load the default configuration (“
defaults
”). In this case, the settings of
the menu items mentioned in the section “save config” are reset to their
factory defaults.
“Save config” – Saving a configuration
Via the “
save config
” menu item, you can save your system configuration
on up to 10 storage memories.
The settings of the following menu items are saved:
The following settings/values are
not
saved:
• time and date settings of the “
Date & time
” menu item (see page 59)
and
• operating hours (displayable via the “
op hours
” menu item, see page 59).
Menu
Menu item
Page
Main menu
“
System setup
”
Output level
Word clock
Network | name of the network
Network | IP settings
Brightness
Extended menu
“
Service setup
”
Date & time | selected time zone
Main menu
“
Channel setup
”
Frequency
Name
Cmd mode
Encryption
Gain
Low cut
Display
Lock
Cable
defaults
load config
modified