Sennheiser SKM 9000, Instruction Manual

Page: 68 / 109

Digital 9000 | 67
Using the EM 9046
Main menu “ Channel setup ”
To get into the main menu:
왘
Select the “ ch ” operating mode.
왘
Select one or several channels (see page 46).
왘
Call up the menu items described in the following and adjust your
settings.
왘
Press the button to store your settings.
왘
Synchronize your settings via infra-red (see page 66).
“Frequency” – Selecting a frequency preset or setting a frequency
manually
Via the “ Frequency ” menu item, you can select a frequency preset for the
active booster frequency range or set the frequency manually. In the
above diagram, range “
A1 ” is active. The frequency range is from
“ 470-494 MHz ”. For information on how to activate a booster frequency
range, refer to page 52.
왘
Either select a frequency preset (“ A1.1 ” ... “ A1.40 ” in the above dia-
gram) or set the frequency manually (“ U ”). If you set the frequency
manually, make sure to set a frequency within the current 24 MHz
booster frequency range and maintain a frequency spacing of 600 kHz
to avoid intermodulation interference.
If you manually set the frequency to a value outside the current 24 MHz
booster frequency range and confirm you setting by pressing the
button
F
, the following error message appears:
If no channel is selected, “ Please select Channel ” is displayed in the
menu selection.
Preset A1.1 Freq 470 . 200 MHz
Range: 470 - 494 MHz
frequency
Frequency out of booster range