Digital 9000
| 55
Using the EM 9046
왘
Adjust the level.
The setting becomes effective immediately.
왘
Press the jog dial to confirm your setting and to return to the channel
selection.
왘
Adjust the level of further channels.
왘
Press the
. Your settings are stored and the receiver then
switches to the main menu.
To change to the main menu without storing your settings:
왘
Press the
esc
button
.
“Word clock” – Configuring the word clock
Via the “
word clock
” menu item, you can ...
• switch between an internally generated and an external word clock
signal;
• adjust the sampling rate (44.1 kHz, 48.0 kHz, 88.2 kHz or 96.0 kHz)
with which – with an internally generated word clock signal – analog
signals are digitalized and output at the XLR-3 sockets
“Cable attn” – Displaying the cable attenuation
The EM 9046 receiver measures the cable attenuation between the
antenna boosters and the antenna inputs
and
and automatically
compensates for it:
• during the boot routine;
• when an antenna booster is connected.
The “
Cable attn
” menu item displays the status of the cable attenuation.
If “
Too high
” is displayed, check and optimize the installation between the
EM 9046 and the antenna boosters.
Always use GZL 9000 system cables to obtain optimum attenuation
values.
internal: 44.1kHz
word clock
RF IN A: OK
RF IN B: OK
cable attn