![background image](http://html.mh-extra.com/html/sennheiser/skm-9000/skm-9000_instruction-manual_1242287031.webp)
Preparing the Digital 9000 system for use
30 |
Digital 9000
왘
Connect the
RF OUT
N-type sockets of the first receiver to the
RF IN
N-type sockets of an additional receiver. To do so, use the RF patch
cables from the EM 9046 CAB cable set.
왘
Repeat the previous steps for up to four receivers.
If you want to pass on word clock signals between daisy chained receivers
and/or if you want to connect daisy chained receivers in a network
(see the following chapters):
왘
Connect the receivers in the same order in which you connected the
RF
N-type sockets. Always connect the network sockets from
LAN DOWN
to
LAN UP
.
The length of the RF patch cables from the EM 9046 CAB cable set
allows a distance of 1 height unit (HU) between two EM 9046 in
a 19” rack.
EM9046
RF OUT A
RF OUT B
ANT A
ANT B
RF OUT A
RF OUT B
ANT A
ANT B
Master
PC (WSM)
RF IN A
RF IN B
RF IN A
RF IN B
RF OUT A
RF OUT B
RF IN A
RF IN B
RF OUT A
RF OUT B
WORD
CLOCK
OUT
IN
WORD
CLOCK
OUT
IN
WORD
CLOCK
OUT
IN
LAN UP
LAN DOWN
LAN UP
LAN DOWN
LAN UP
LAN DOWN