Senlan SB200 Series, User Manual

Page: 46 / 181

Lists of function parameters
42
Paramete
r
Name Setting Range and Description
Factor
y
setting
s
Mod
ificat
ion
Page
F5-11
Output Functions
of T10/Y7
(Extension
Output)
±22: PC digital quantity 1
±23: PC digital quantity 2
±24: Motor #1 in
variable-
frequency operation
±25: Motor #1 in line
frequency operation
±26: Motor #2 in variable
frequency operation
±27: Motor #2 in
line-frequency
operation
±28: Motor #3 in variable
frequency operation
±29: Motor #3 in
line-frequency
operation
±30: Motor #4 in variable
frequency operation
±51: Indication for sleeping
operation
±52: Water shortage in
suction pool
±53: Abnormal closing
of contactor
±54: drainage pump control
±55: Water injection
valve control
for Pump #1
±56: Air vent valve control
for
Pump #1
±57: Water injection valve
control
for Pump #2
±58: Air vent valve control
for
Pump #2
±59:Firefighting patrol
in
operation
±60: AI1>AI3
32
106
F5-12
Output Functions
of T11/Y8
(Extension
output)
NOTE: A negative value indicates that the relay will be
switched off when an effective signal is emitted
33
106
F5-13
Attainment of
Frequency to
Detection Width
0.00—650.00Hz 2.50Hz ○ 110
F5-14
Monitors 1, 2
and 3 Options
Hundreds digit: Monitor 3
Tens digit: Monitor 2
Units digit: Monitor 1
0: Working frequency;
Detection Mode 1
1: Working frequency;
Detection Mode 2
2: PID feedback value;
Detection Mode 1
3: PID feedback value;
Detection Mode 2
000 ○ 111
F5-15
Detected Value of
Monitor 1
20.00 ○ 111
F5-16
Detection Lag
Value of Monitor
1
5.00 ○ 111
F5-17
Detected Value of
Monitor 2
Frequency detection: The input parameter is the value of
the detected frequency
PID feedback value detection: The input parameter is the
value of the detected feedback value
40.00 ○ 111