SENKO cookers 2P extra rustik and glass
–
Instruction manual
4
1. GENERAL
Solid fuel central heating cookers
E2125 L/D C-20 2P extra rustik
E2135 L/D C-30 2P extra rustik
E2220 L/D C-20 2P glass
E2230 L/D C-30 2P glass
E2420 L/D C-20 2P glass design
E2430 L/D C-30 2P glass design
are models from the SENKO cookers palette which can accommodate your
needs in the best possible way. Therefore, we ask you to CAREFULLY
READ THESE INSTRUCTIONS, which will help you to achieve the best
possible results already during the initial use.
The manufacturer is not responsible for any
consequences
(people
or animal injuries or property damages)
resulting from failure to comply
with this
Manual
.
The cooker is hot during operation and
the use of
protective heat insulated gloves is compulsory during handling
.
Children and infirm individuals are not allowed to handle the cooker.
The external appearance of the cooker is shown on the first page of this
Manual. Cooker principal parts are made of stainless steel boiler plates and
castings of quality grey cast. The cookers are produced with flue gas
connection point on the left or the right side.
When ordering the cooker or
the spare parts, it is necessary to state its full designation
, for
example: cooker E2220D C-20 2P glass, which means that it is the cooker
with glass coating and the flue gas connection is on the right side, if the
stove is observed frontally.
The cookers are manufactured and certified in accordance with the EN
12815 standard and comply with all the requirements set by this standard.
