Technical Data Sheet
FI 72.0239.0320E
Page 40 / 108
The slave boxes are cabled on a secure bus. Each slave is numbered to define its function in the
installation. This coding is produced by two coding wheels on the electronic card located S2 and S3.
When there is any card change, this card must be coded before being connected to the bus.
Classification from 1 to The last box on the bus
S2 : ten is equipped with a load plugged
S3 : units into the « link » connector
Several leds on the slave card show different information:
GREEN LED:
STATE OF THE INPUT
FINAL POSITION
OPEN CELL
Lit if input = 1
GREEN LED:
STATE OF THE INPUT
FINAL POSITION
CLOSED CELL
Lit if input = 1
GREEN LED:
STATE OF THE
COMMUTATOR
Lit if commutator on “1”
YELLOW LED:
TRANSMISSION
ON BUS
lit at each transmission
YELLOW LED:
RECEPTION ON BUS
lit at each reception
RED LED:
Lit during each activation on
a solenoid valve (EV) output
(even)
RED LED:
Lit during each activation on
a solenoid valve (EV) output
(odd)
RED LED:
Lit if the cell isolation output
is pilot (controlled)
RED LED:
Lit if the header isolation
output is pilot (controlled)
Summary of Contents for SFX+NETWORK
