ProLogic L66
Operation Instructions
44
Step 5: After receiving the One Time Use Recovery Code from the Recovery Center, press the
“back” button; and you will be prompted to enter your Recovery Code.
Step 6: Your system will now be restored and will display this message:
The Super Code will now be reset to 111111 (PW L 6/Users 10 or PW L 6/Users 30) or 11111100
(PW L 8/Users 30).
The Manager Code will now be reset to 123456 (PW L 6/Users 10 or PW L 6/Users 30) or
12345600 (PW L 8/Users 30).
Time Delay, if programmed previously, remains active.
16.3 Disable Recover
In some jurisdictions, the Recovery feature is prohibited (Australian Government). You have the option
to disable the recovery feature if desired.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
to the menu selection “Disable Recovery” and Press OK.
