ProLogic L66
Operation Instructions
37
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter the Super Code (ID00).
This
function is not available in the menu accessed by the Manager Code (ID01).
The “Select Menu”
message will be displayed as follows:
Step 4: Scroll
to the menu selection “Duress Code Shift” and Press OK.
Step 5: Using the numbers on the EntryPad enter 00 and press OK.
Duress code is now disabled and a valid code e/- 1 digit will show as an invalid code.
14.0 Wireless Management
The ProLogic L66 has a built-in wireless transmitter/receiver. This wireless feature allows you to
connect to the safe lock wirelessly in a number of different ways depending upon your security
requirements:
i)
Download audit trails at the safe location using SecuRam’s Wireless Link. For more
information, please refer to the Wireless Link Operation Guide.
ii)
Download audit trails using Securam’s Wireless Station Management. For more
information, please refer to the Wireless Station Management Software.
iii)
Upload programming locally using Securam’s Local Parameters Management Software. For
more information, please refer to the Local Parameters Operation Guide.
In order to operate this function, the EntryPad must be set to communicate with the Host connection
device. Complete the following procedures to establish communication.
14.1 Set Device ID Number
The Device ID must be set in the EntryPad so that communication can be established. The Device ID is
similar to an “IP address” on other PC compatible devices or equipment.
00
