ProLogic L66
Operation Instructions
30
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
to the menu selection “Set Time Table” and Press OK.
Step 5: There are two Time Table Profiles that can be used as shown below. Since there are two
Time Table profiles, you can specify two periods of time in any given day during which the safe
can be opened. You can change between Time Table 1 and Time Table 2 by using the
and
arrows. The same buttons can be used to change the profile from enabled to disabled.
Understanding the Time Table Profile settings:
Y (Yes) means profile is enabled and safe can be accessed according to the Time Table during the time
period specified in the daily settings.
N (No) means profile disabled and therefore there is no time table established during which the safe can
be opened, regardless of the daily settings.
By default Time Table 01 is set to “Y” which means the Time Table is enabled and the daily settings will
be prescribed to and the safe can be opened during the time period specified in the daily settings.
12/17:13 8.4V
Time Table
Y 01
12/17:13 8.4V
Time Table
N 02
