manualshive.com logo in svg

Securam ProLogic L66, Operation Instructions Manual, Page: 40 / 48

Share
Download
Securam ProLogic L66 Operation Instructions Manual Download Page 40

ProLogic L66 

Operation Instructions 

 

40 

 

Step 2:  Using the 

 and 

, scroll to the System Menu and Press OK. 

 
Step 3:  The display will prompt you to enter a valid code.  Enter either the Super Code (ID00) or 
the Manager Code (ID01).  The “Select Menu” message will be displayed as follows: 

 

 

 

 

 

 

 
Step 4:  Scroll 

 to the menu selection “Restore Data” and Press OK. 

 
 
Step 5: Press OK.   
 
 
Data will be received at the EntryPad from the Parameters Management software.  The LCD will 
display the records as they are received and report a successful upload. 

 

15.2  Backup Data 

Similar to the “Restore Data” feature, the ProLogic L66 can back-up its programming parameters to 
SecuRam’s Parameters Management software.   

 
Step1:  Press the Menu/OK button.  
 
 
Step 2:  Using the 

 and 

, scroll to the System Menu and Press OK. 

 
Step 3:  The display will prompt you to enter a valid code.  Enter either the Super Code (ID00) or 
the Manager Code (ID01).  The “Select Menu” message will be displayed as follows: 

 

 

 

 

 

 

 
Step 4:  Scroll 

 to the menu selection “Backup Data” and Press OK. 

 
 
 
 
 

 

Step 5:  Press OK to send data. 

 
15.3  Encryption Key Set 

The ProLogic L66 sends and receives data to the lock in an encrypted form.  This is a security measure to 
ensure that all data is protected.  The Encryption Key is set during the manufacturing process with a 
default encryption key value.  This value can be changed using the Encryption Key Set menu selection.   

Summary of Contents for ProLogic L66

















































Reviews:

No comments