ProLogic L66
Operation Instructions
42
This is a vast improvement over other commonly used reset functions, as it offers a very secure recovery
method.
16.1 Recovery Code Set
The default recovery Code is 999999 (PW L 6/Users 10 or PW L 6/Users 30) or 99999900 (PW L 8/Users
30). It is not necessary to change this code, but if preferred this code can be changed with the following
procedure.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll UP to the menu selection “Recovery Code Set” and Press OK.
Step 5: You will be prompted to enter the existing Recovery Code; Press OK.
Step 6: The LCD screen will display a Key Code. Record this number and call an authorized
SecuRam Recovery Center or SecuRam Tech Support at 1-805-988-8088 for an Authorization
Code. This code remains valid for a period of 20 minutes only.
Step 7: After receiving the One Time Use Authorization Code from the Recovery Center, press
the “back” button; and you will be prompted to enter your Authorization Code.
