ProLogic L66
Operation Instructions
11
Note: The ProLogic L66 has a function called “Duress Code Shift”. This function allows you to specify
the number to be added or subtracted from the code during a duress entry. See Section 12.0.
3.4 Opening the Lock in Dual Control
The ProLogic L66 can be programmed so that two User codes are required to open the lock. This
function is called “Enable Dual Mode”, See Section 9.2
To Open a Lock under Dual Control:
Step 1: Enter User code
The display will read “IDXX Verified”.
For example, ID03 will display “ID03 Verified”.
The display will then read:
“Enter 2
nd
User Code”
For example, using ID04 for 2
nd
code will read “ID04 Verified”.
The lock will open and relock in 6 seconds.
3.5 Opening the Lock with a Multi-Lock System
The ProLogic L66 can operate up to 4 locks.
To Open a Lock with a Multi-Lock System:
Step 1: Enter a valid code
The display will read “IDXX Verified”.
Step 2: The system will now prompt you to enter the number of the Lock to open
4.0 Set Date and Time
The ProLogic L66 is an audit lock and it tracks events based on user, activity, date, and time. In order to
set the system date and time complete the following process.
4.1 Set Clock Time
Step1: Press the Menu/OK button
