CorreluxView-3 software
25
7
CorreluxView-3 software
7.1
Introduction
CorreluxView-3 is the multifunctional user software for working with devices in the
Correlux C-3 and Correlux C-300 series.
Installed on a laptop with connected COR C-300-RI radio interface
Using the software, the Power transmitter and Multi sensors of the system can be
programmed and the recorded audio data can be correlated. All measurements taken
can be stored in the database of the software. They can then be accessed at any time
and processed further.
7.2
Installation
The following requirements must be met in order to use the software on a laptop or PC:
•
Operating system Microsoft Windows 7 to 10 ®
•
At least Pentium IV processor, 2 GHz or higher (or equivalent)
•
At least 4 GB of RAM
•
Minimum screen resolution 1024 x 768 pixels
•
USB port
•
CD ROM drive
The
CorreluxView
-
3
program
can
be
found
on
the
supplied
data CD.
Start the installation file on the CD and follow the instructions on the screen.
The program will be installed to the hard disk of the computer in the folder
C:\Program Files\SebaKMT\CorreluxView
.
In addition, a directory for storing the recorded audio data is created. It is possible to
change the storage location for this data in the configurations of the software.
We recommended that you keep the software current at all times.
SebaKMT provides improved versions of the CorreluxView-3 software in the download
area of
www.sebakmt.com
on a regular basis.
To perform an update, retrieve the latest software from the download area. After
unpacking, start the installation file and follow the instructions on the screen.
System requirements
Installing the software
Updating the software
