CorreluxView-3 software
31
To remove a directory from the directory tree, proceed as follows:
Step Description
1
Select the relevant directory in the directory tree.
2
Click on
Delete
in the
Folder
segment.
3
Answer
Yes
to the delete confirmation prompt.
Result:
The directory as well as all measurements stored under that directory are
deleted from the database.
7.6.2
Renaming and deleting measurements
You may also change the name of an existing measurement. Proceed as follows:
Step Description
1
Select the relevant measurement in the directory tree.
2
Click on
Edit
in the
Measurement
segment.
Result:
A window opens.
3
Enter the new name for the measurement, then click on
OK
to confirm your input
To remove a measurement from the directory tree, proceed as follows:
Step Description
1
Select the relevant measurement in the directory tree.
2
Click on
Delete
in the
Measurement
segment.
3
Answer
Yes
to the delete confirmation prompt.
Result:
The measurement record is removed from the directory.
The measured data are deleted from the software database.
7.7
Editing a map
The Map section is intended to provide a realistic overview of the sensors and pipelines
in the measuring area.
The sensors used are shown as icons. Pipelines can be drawn between these icons and
the pipe parameters can be specified.
Provided that GPS data for the measuring points are known (i.e. the coordinates of the
measuring points have been determined and saved prior to measurement), the
CorreluxView application will automatically arrange the sensor icons in the map section
so that they correspond to reality.
Deleting a directory
Renaming a
measurement
Messung löschen
