Listening to leak noises from a stored measurement
51
11
Listening to leak noises from a stored measurement
You can listen to the “leak noise” of a sensor. This is the quietest recording that was
taken by the sensor during the measurement.
The included headphones must be connected to the COR C-300-RI device. Using the
volume buttons
on the device, the lowest volume setting should be set on the
headphones.
Proceed as follows:
Step Description
1
At the top of the display area, open the
Measurement
tab.
2
Look for the corresponding sensor in the sensor list.
3
Click the Play button
in the field with a grey background.
Result:
The 3-second recording is played in a continuous loop.
4
To stop playback, click the same button again.
In the grey field, the frequency response of the leak noise is shown as a yellow trace. If
no yellow trace can be seen, no leak noise is available for this sensor.
Requirements
Procedure
