The Multi sensors
21
6
The Multi sensors
6.1
Design and function
Each Multi sensor has a highly sensitive piezo microphone with active amplifier, a data
memory, a rechargeable Li-Ion battery and a radio module with antenna inside.
The sensors have the following external characteristics:
Element Description
Status LED
flashes green
... Battery OK
flashes yellow
... Battery critical
flashes red
... Device needs to be re-charged
flashes rapidly ... Device is charging
no light
... Device is turned off
ON/OFF contact area I/O
Magnetic foot (detachable)
Type plate
Carrying ring (detachable)
6.2
Identification number (ID)
Each Multi sensor has its own six-digit identification number (short: ID). Using this ID the
device can be managed and clearly identified in the CorreluxView-3 software and within
the SebaKMT-Cloud.
The ID is deduced from the last six digits of the device's serial number (short: SN).
You find the serial number on the nameplate of the device.
When entering an ID on the computer, the preceding zero digits can be omitted.
