The Power transmitters
18
The Power transmitters have the following lights (LEDs):
Element Description
LED bar
lit green ... represents the current battery level
lit red
... represents the noise level
I/O LED
lit green ... the transmitter is switched on
flashing ... the device is charging
not lit
... the transmitter is switched off
Radio LED
lit red
K the transmitter is in "Active" mode,
noise measurement in progress,
measurement data is being sent to the Correlator
not lit
K the transmitter is in "Stand-by" mode,
no measurement in progress,
no radio traffic
5.2
Identification number (ID)
Each Power transmitter has its own six-digit identification number (short: ID). Using this
ID the device can be managed and clearly identified in the CorreluxView-3 software and
within the SebaKMT-Cloud.
The ID is deduced from the last six digits of the device's serial number (short: SN).
You find the serial number on the nameplate of the device.
When entering an ID on the computer, the preceding zero digits can be omitted.
Indicator lights
