Offline correlation (multiple-point measurement)
50
10.3
Displaying a leak
You can show the calculated leak(s) in the map.
Proceed as follows:
Step Description
1
At the top of the display area, open the
Measurement
tab.
2
Above the map, click
.
Result:
A new window opens on the screen. Here, all sensor pairs are listed that
are connected directly to each other in the map.
If you click on the trace symbol
in the window, the correlation for the corresponding
sensor pair is started and displayed.
If you click on the drop symbol
in the window, in the map the leak position is
displayed that results from the correlation of the sensor pair.
The leak position can only be shown when a correlation has already been performed for
this sensor pair.
If you click on the same symbol again, the leak is removed from the map.
Correlation
Display leak
List of sensor pairs
(Sensor number
section length
sensor number)
