The Power transmitters
19
Example:
Serial number (SN):
0889000594
Identification number (ID):
000594
Entry on the computer:
594
You can enter the ID manually on the computer or use the “automatic detection”
function. Automatic detection means: If you briefly press the I/O button of the Power
transmitter, the ID of the device is sent to the computer and recognised there.
5.3
Power supply
The Power transmitters are fitted with internal rechargeable Li-Ion batteries This can
power the device for approximately 12 hours.
On the Power transmitters, the current battery status is indicated by the LED bar
when it is green. If only one of five LEDs is lit, the device should be charged. Otherwise,
it switches itself off automatically.
Red light represents the recorded noise during the measurement and not the battery
status.
In the sensor pool of the CorreluxView-3 software, you will also find an indication on the
battery status, provided the corresponding Power transmitter is logged on there and
currently available.
The Power transmitters are charged wirelessly in the transport case. The case must be
connected to a power supply. As soon as the Power transmitters are situated at their
storage places in the case, they are recharged inductively.
Charging takes approximately 12 hours. The I/O LED
flashes when loading. The
LED bar
indicates the progress of charging. The I/O LED turns back to permanent
light
as soon as the battery is full.
CAUTION
No objects must be put into empty charging stations.
Risk of fire!
The charging stations are for transport and charging of the devices only.
NOTE
Any repairs must be carried out by SebaKMT or an authorized service
partner.
Otherwise, the devices' resistance against water and dirt cannot be
guaranteed.
Do not open the device yourself. If you have problems with the battery,
please contact your SebaKMT service partner.
Battery level
Charging
