The Unwind Roller is designed to hold a 3 in. internal diameter
tube. Lift one end of the Unwind Roller and slide a roll of
substrate down the roller until centered, then set the roller-end
back into Cradle.
Lift and push the Unwind Roller back into operating position.
Turn the roller locking knob back 90 degrees or until it sets with
the Roller Shaft Lock, sliding in.
Return the locking pin.
20
21
Summary of Contents for AquaSEAL SW-2600
Page 4: ......
Page 43: ...Notes 31 33 ...
