There are tie straps on both ends of the Draw-Down Applicator located at the
top front of the unit. Cut and remove the tie straps.
Additional parts necessary for assembly are
located on the top of coater (Unwind Roller)
and on the lower compartment (Cradle
Brackets and hardware). Cut the ties using
care not to damage the parts, and remove
plastic.
Unwind
Roller
Storage
Cradle Bracket
Storage
Figure 14: Parts tie down locations
Bolt the Cradle Brackets to both sides of the unit with hardware provided and
install the Unwind Roller (see Figure 15 - below).
Unwind
Roller
Cradle Bracket
Figure 15: Cradle Bracket and Unwind Roller Installation
16
Summary of Contents for AquaSEAL SW-2600
Page 4: ......
Page 43: ...Notes 31 33 ...