1.8 Emergency Stop Buttons
There are three red Emergency Stop Buttons, located prominently in front on both
ends of the unit and on top of the unit at the center. When pressed, all power is
shut down, and all pneumatic assemblies return to their safe state (see Section
2.8).
Emergency Stop Buttons
Figure 3: Emergency Stop Button Locations
1.9 DO’s and DON’Ts
DO comply with all safety
warning signs, labels, and
instructions.
DO NOT operate unit until it is
connected to the proper power source.
DO NOT place unit near open flames.
DO train operators on the proper
use of the machine and all safety
procedures.
DO NOT wear loose clothing or loose
jewelry, and contain loose hair to
avoid becoming entangled with
moving parts of the machine.
DO familiarize operators with the
layout of the Control Panel and
with the operation of the sealant
delivery system.
DO NOT reach into pinch areas or
touch hot spots.
DO provide fresh water, clean
towels and rubber gloves for use
during cleanup.
DO wear eye protection.
DO provide an approved
emergency eyewash station
adjacent to the machine.
4
Summary of Contents for AquaSEAL SW-2600
Page 4: ......
Page 43: ...Notes 31 33 ...