General Safety Information
Do not operate the machine until it is connected to the proper power
source. Refer to the electrical installation instructions.
It is strongly recommended that the machine is fed from an “Earth
Leakage” protected electrical outlet – if in doubt, please contact Hunt
Technical Services (contact details in the “Miscellaneous” section at the
rear of the manual) or consult a license electrician.
Familiarize yourself with the layout of the Control Panel, and with the
operation of the sealant delivery system.
Do not wear loose clothing, and make sure hair is tied back to avoid
becoming entangled in the machine.
Comply with all safety warning signs, labels, and instructions.
Operators should be trained on the proper use of the machine and all
safety procedures.
Provide fresh water, clean towels and rubber gloves for use doing
cleanup.
It is advisable to wear eye protection when filling/emptying sealant tank.
Always provide an approved emergency eyewash station adjacent to the
machine.
Machine Unpacking Instructions
1. Remove screws from top panels and set panels aside.
2. The two (2) shipping straps can now be removed by unscrewing the nuts at the
base of crate, or by releasing the ratchet mechanism.
3. Remove screws from caster stop blocks, release the brake at all four (4)
casters. Machine can now be carefully rolled off skid. (
Note: After placing machine
in vicinity of operational position, set caster brakes to keep machine in place.)
VII
Summary of Contents for AquaSEAL SW-2600
Page 4: ......
Page 43: ...Notes 31 33 ...
